Resolve Macard WiFi Extender No Internet in Minutes

Are you facing no internet issue on your Macard WiFi extender device? Here, you will get to find the reasons of the issue and how to resolve Macard WiFi extender no internet issue with help of simple solutions.

Reasons Why Macard WiFi Extender Has No Internet

This section will discuss the primary causing factors why your Macard WiFi extender having no internet connection:

• The extender signals are being interfered.
• Extender is not connected to the host router.
• Technical glitches and bugs
• The issue occurs from the ISP end

Now, let’s solve it with the help of a few troubleshooting tips and solutions provided below:

How to Resolve Macard WiFi Extender No Internet Issue?

All tips and solutions given in this section are already tested to resolve the same type of issue, so you can use it without any hesitation.

Reconnect Extender with Router

Disconnect the extender from the power and router. Then reconnect it to power and router via WPS button or interface.

If you are using WPS

• Press the WPS button on the extender once.
• Push the WPS button on the router.
• Wait for connection and join the extended network.

If you are using interface

• Connect a computer to extender network.
• Go into browser and search Go.macard.online.
• Log into the interface and connect the extender with the router.

Check Cables If Used for Connection

If you are using the Ethernet cable to connect the extender with the router, check it is in good condition. Make sure the cable has no cut, if it has, replace it with a new one.

Check Router to Modem Link

The extender gains its signals from the router via cable or Wireless or WPS, and router get its signals from the modem via Ethernet cable. So, you must check the router to modem connection as well. Make sure the Ethernet cable is connected to the correct ports (router’s WAN port and modem’s LAN port). Also, examine any cuts on the cable.

Update Extender Firmware

Try updating the WiFi extender from interface on your computer. To check or update the device, get access to the extender interface from your computer. Choose settings in the interface and select the Firmware tab. Here, click Check for Updates, if the new update is available then click Install button.

Reboot Extender Network

Rebooting the extender network might solve the problem. To restart the device, press the power button on the extender twice. This will disconnect and connect the extender with power and reboots the extender.

Reset Macard WiFi Extender

The reset should apply when no tip and solution works. This action will delete all data from the router and after that you have to re-configure the extender through the interface.

Reset:

1. Find the reset button at the side of the extender.
2. Push the button with a paper pin or pen.
3. Hold it for 8 seconds and release.
4. Wait until the extender restarts and start the reconfiguration process.

Reconfiguration:

• Connect a computer to extender network.
• Go into browser and search Go.macard.online.
• Use the default admin credentials to Log into the interface.
• Choose the host router network and enter the password to connect.
• On the next page, enter the new extended WiFi name and password.
• Click SAVE button and a new WiFi network will appear in the WiFi list of your internet devices.

Conclusion

The post explained reasons why the Macard Extender is not getting any internet. To resolve it, we have walk you through simple and straight forward tips and solutions. Hope, you solved the issue, if still facing the issue contact our experts for help.

FAQs