Macard Extender Not Working: Need to Reset

The Macard WiFi extender is one of the best signal boosters that works to boost the home router’s signals. The range of the extender is divided into two frequencies: 2.4 GHz & 5 GHz. Both the channels have different capabilities. But what if both the channels don’t work because of Macard WiFi extender not working issue. The most used solution to resolve the problem is resetting the extender device.

We will explain how you can apply the reset procedure and solve the issue. But first, you need to know why Macard extender not working.

Why Macard Extender Not Working?

• Forgotten login info – Can’t remember the admin password? A reset gives you a clean slate.
• Poor performance – Frequent disconnections or sluggish speeds? A reset might fix it.
• Device won’t connect – If your devices aren’t recognizing the extender, a reset can re-establish the connection.
• Changing WiFi setup – Moving to a new router? Resetting helps remove the old settings completely.

Reset Macard Extender to Resolve the Issue

1. Locate the Reset Button

Find the reset button on your Macard extender. It’s usually a tiny hole labeled RESET most likely on the side or at the back. You’ll need a pin, SIM ejector, or paperclip to access it.

2. Press and Hold

Push the pin into the reset hole and press and hold for 10-15 seconds. You’ll probably see the LED lights on the extender start to blink or go off that’s your cue it’s resetting.

Tip: Keep holding even if the lights blink early. Let it reset fully.

3. Wait for Reboot

Once you release the button, the extender will restart itself. This might take 1–2 minutes. You’ll notice the lights turn back on gradually.

Once done, it’s officially reset. It’s like starting fresh out of the box.

Reconfiguration: Macard WiFi Extender

1. Open WiFi settings on your device (phone or laptop). Look for something like “Macard_EXT” or “WiFi_EXT”. Connect to it. No password needed at this stage.
2. Open your browser, type: 192.168.10.1 & Press Enter. You’ll land on the Macard WiFi extender setup page. Enter default login: Username: admin, Password: admin
3. click “Repeater Mode” or similar option. It’ll scan for available networks. Select your home WiFi network (the one from your router). Enter your WiFi password carefully. Choose a new name for your extended network.

Before resetting the Macard extender not working, you should try some impactful troubleshooting tips and solutions.

Other Solutions than Resetting the Device

1. Restart the Device

This one gets overlooked far too often. Restart means turning your device off and then back on might solve a lot of problems. Reboots works on smartphone, router, laptop, or smart TV, to clears temporary bugs, memory overload, and processes running in the background.

How to do it: Hold the power button, choose restart instead of shut down when available.

Why it works: It refreshes the system without deleting your data.

2. Update Firmware or Check for New One

Outdated software can lead to performance glitches, compatibility problems, and security issues. Manufacturers regularly push updates to improve stability and fix bugs.

• Go to Settings > System > Updates.
• On routers or smart devices, check the admin panel (go.macard.online or 192.168.10.1) for firmware options.
• Install and reboot.

Result? Your device gets back on track with minimal effort – no reset needed.

3. Clear Cache or Temporary Files

Cache data builds up over time and can cause devices and apps to act sluggish or buggy. Instead of resetting, clearing the cache can often bring things back to life.

• On Android: Settings > Storage > Cached Data
• On browsers: Settings > Privacy > Clear Browsing Data
• On routers: Reboot clears temp logs

The Conclusion

From this blog post, you have learned about how to resolve the Macard extender not working by resetting the WiFi range extender. We have also provided you with a few more troubleshooting tips and solutions so that you try to fix the issue before resetting the device.

FAQs