Easy Setup for Macard N300 WiFi Extender

There are many places in your home where your WiFi connection is weak. Here you need to use the Macard N300 WiFi Extender. It boosts your WiFi connection and boosts it to reach more places. There are easy steps in this blog post that will show you how to setup Macard N300 extender. You can follow these easy steps even if you’re not tech-savvy.

What is the Macard N300 WiFi Extender?

The Macard N300 Extender is a tiny device. It takes the internet from your router and sends it to places with weak interne. This helps you get better internet in rooms far from your router. The extender works on the 2.4 GHz frequency and is easy to use.

How do I connect my WiFi extender 300?

Step 1: Plug in the Extender

First, plug the Macard N300 extender into a power socket. It is best to put it somewhere between your router and the place where the WiFi is weak. Avoid plugging it near metal objects or thick walls because they can block the signal.

Step 2: Attach with Extender’s WiFi

Look for a new network named something like “WiFi Extender” or “Macard_N300.” Connect to this network. Make sure your mobile data is off so your device uses the extender’s WiFi.

Step 3: Open the Setup Page

Open a web browser and type this address: go.macard.online or 192.168.10.1. This will open the setup page for the extender.

Step 4: Log In

You will need to enter username and password. The default credentials in pasted on the extender’s label. Fill this detail and enter on login button.

Step 5: Choose Your WiFi Network

The extender will show a list of WiFi networks nearby. Find your home WiFi network and select it. Enter your WiFi password carefully. This lets the extender connect to your router.

Step 6: Save and Restart

Click “Save” or “Apply.” The extender is going to reboot and attach to your router. After it restarts, it will create a new WiFi network with a name like your original WiFi plus “_EXT” at the end.

Step 7: Move the Extender

Unplug the extender and place it where you want better WiFi. It should be mid location between your router and the weak area. Plug it in and turn it on.

Step 8: Connect Your Devices

Now, attach your your devices to the new created network (the one with “_EXT”). You should see better internet in places where it was slow before. This way you can setup Macard N300 extender easily.

Common Questions

• How do I reset the extender?
  Hold the reset button for 15 seconds. The extender will restart and go back to factory settings.
• Will the extender make my internet faster?
  No, it only makes your WiFi cover more area. It also depend on your internet plan.
• Does it work with 5GHz WiFi?
  No, Macard N300 works only on 2.4GHz WiFi.
• Can I use an Ethernet cable to connect it?
  No need. It connects wirelessly to your router.
• What if I have problems?
  Check the Macard N300 WiFi Extender User Guide or contact support.

Final Words

It is simple to setup Macard N300 WiFi Extender. If you follow these easy steps, your WiFi will work better right away. You don’t have to know a lot about technology or spend a lot of money to fix weak WiFi spots with this extender.
Remember to link your devices to the new network and put the extender in a good spot. Enjoy strong Wi-Fi everywhere. (You can also use the MARCARD N300 WiFi Extender User Guide to setup)

FAQs